Yixing Manufacturer Color Removal Chemical Packed in 30kgs Jar to
- Yixing Bluwat Chemicals is the biggest manufacturer of color
removal chemical, which is high efficient decolorizing flocculant, special product for de-coloring, flocculating, CODcr decreasing and
other applications, used to remove color of waste water generated
by textiles process houses and dyes industries and other fields.
- Good performance for treating textile wastewater containing the
hydrophilic dyes (reactive dyes, acid dyes, disperse dyes etc.),
less dosage, the color clear, fast speed, high processing liquid
clarification of the settlement, but also reduce the composition of
- It has high color removal of dye wastewater, by providing a large
number of cations, the negative charge is brought on dye molecules
are neutralized instability, at the same time with BWD-01 Water
Decoloring Agent by a large number of hydrolysis of flocs. Can be
adsorbed dye, destabilization of the snare, from water separation,
so as to achieve the purpose of bleaching.
- It can be used before or after the biochemical treatment, suggested
to dose after the biochemical treatment, can be with low
consumption, and low effect to the bacteria.
- In paper making, BWD-01 Water Decoloring Agent also can be used as
fixing agent in the paper processing, will be very good
- BWD-01 Water Decoloring Agent is mainly for wastewater color
treatment for textile dyeing & printing mills, dyestuffs &
pigment mills, ink & paper making mills.
- High available to treat waste water with soluble dyesuff, as
Reactive dye, Acid dye, Disperse dye, Direct dye, Sulphur dye, Vat
- As as retention agent in paper and pulp process.
Colorless translucid liquid
Specific Gravity at 20°C:
PH Value (30% Solution):
Soluble With Water at Any Rate
30kgs, 250kgs, 1250kgs net IBC drum
Special product for textile and dyestuff waste water color
Has strong decolorization (50%~99%) and removal of COD (50%~80%)
for different dye effluent.
High performance to treat wastewater with water soluble dyestuff,
such as Reactive, Acid, Disperse, Direct Dyestuff etc.
Used to treat wastewater from pigment industry, printing ink
industry and paper industry.
Used as retention agent in the paper & pulp processing
Faster sedimentation, better flocculation.
Less sludge produced than other inorganic coagulants.
Mix color removal chemical with 40 times water to have 2.5%
Make PAC solution, 2-5% Al2O3
Have solution of Anionic Polyelectrolyte, 0.1%.
Have effluent, test pH value, adjust pH value to 8-9.(It is very
important, higher or lower pH, BWD-01 works not well)
Add PAC solution, mix with effluent completely. about 1-3 minutes
Add BWD-01 solution, mix with effluent completely, about 5-10
Add small content of anionic polyelectrolyte solution, mix slowly
to have big floc. (this step is suggestion)
Sedimentation, Check color for treated effluent
Adjust dosage of color removal chemical and PAC to do more test to
have better testing result.
Package and Storage:
- Packed in 30kg, 250kgs, 1250kgs net drums, or others according to
the requirements of clients.
- Suggested to store in room temperature, would show slightly
stratification or appear white at low temperature, cannot be placed
in the sun.