Water treatment flocculant Anionic Polyacrylamide PAM
Blufloc APAM Description:
- Anionic Polyacrylamide can be used widely for Water treatment, oil
drilling, Soil Stabilization and Cement making.
- It is a water soluble polymer formed from acrylamide (a compound
with the molecular formula C3H5NO) subunits.
- Anionic Polyacrylamide has a big range of high molecular weight
from 05-25 million, with an anionic charge density ranging from
- It is most often used to increase the viscosity of water (creating
a thicker solution) or to encourage flocculation of particles
present in water.
- Soluble in water, safe, non-toxic, hydrolytic stability, is not
sensitive to the change of pH value, anti-chlorine. Harmless,
no-flammable and non-explosive, it can be stored at room
temperature, it cannot be placed in the sun. It is slightly acidic,
when skin contact, wash immediately with plenty of water.
Blufloc A-3515 Specifications:
Off-White Granular Powder
Approximate Brookfield viscosity at 25° C:
Specific Gravity at 25°C:
PH (1% aqua solution):
Storage Temperature (°C):
0 - 35
Blufloc APAM Application Fields:
|As flocculants for raw water sedimentation, thickening and
Used for acidophilic water systems. If matched with PAC, aluminum
the effect will be excellent.
Dosing polyacrylamide can reduce the consumption of coagulant and
Coal washing tailing centrifugal separation
Sedimentation and filtration of coal powder and coal mud.
Highly improve the recovery rate of coal powder and the filtration
As chemical mudding agent for plugging water of dikes, ground
channels and the like.
Used as fixing agent, residency agent, filtration aid and paper dry
intensity reinforcing agent in paper-making industry.
Dissolved into 0.3% concentration and cross-linking agent added. It
can be sprayed on desert to prevent and solidify sand.
For sugar and juice flocculation, sedimentation, clarification and
It can preserve water and solidify sand for soil and can play a
role of humectant on slope grass planting, tree planting, and sand
solidification and dust prevention of soil.
Textile Sizing, as a kind of composition for chemical grout, starch
Highly improve the adhesive property, penetrability and desizing
performance, enable the textile to have electrostatic prevention
performance, reduces the desizing rate, and reduces the starch
mixing spots, cloth machine breaking efficiency, and falling
Application and Dosage:
The dosage range of varies from 0.2 - 3.0 ppm depending upon the
type of effluent and application. Advised to do jar tests for
evaluating the functioning and approximate dosage.
Put sample of effluent in a beaker and add it as designated,
agitate for 1 minute at 100-120 rpm and then slowly agitate at
60rpm. Determine the floc properly at this time and note the
sedimentation and clarity of top solution.
Procedure and precautions upon dispersion and dissolving
Dissolving time: The time required to dissolve the flocculant varies according to
the type of flocculant, water quality, temperature and agitation.
However, most flocculants generally require around 1 hour of
agitation to completely dissolve the powder. Incomplete mixture of
flocculant or lumping may inhibit the performance of the
Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high
speed agitator operating without reducing the revolution of a motor
is not advised, since it may cut the molecules of the flocculant.
An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.
Dissolving concentration: Flocculants should be standardly be dissolved to 0.1-0.5%
concentration. It is also effective to start dissolving at a
slightly higher concentration, and then dilute the flocculant
mixture immediately before use.
Handling measures and precautions:
Proper human safety products such as Splash goggles, lab coat,
vapor respirator, gloves and boots should be worn while handling
and applying chemicals. Splashes on skin should be washed off with
water immediately. In case of splashing into the eyes, flush it
with fresh water and obtain medical attention. Should not be
injected. Please refer MSDS for more details.
Blufloc APAM Package and Storage:
- Packed in Kraft or PE bags with inner plastic bags, with each bag
containing 25kgs, or 750kgs net big bag.
- Stored in original packaging in cool and dry place, away from
sources of heat, flame and direct sunlight.