Sand Washing Water Treatment Flocculant Equivalent to SNF Floeger
AN934VHM Bluwat Anionic Polyacrylamide
Blufloc APAM Description:
- It is the Anionic Polyacrylamide with very high Molecular Weight
and Anionic Degree equivalent to SNF Floeger AN934VHM for sand
washing wastewater treatment, clarifying the water, settling down
- For various industrial wastewater flocculation sedimentation,
sedimentation and clarification treatment, such as iron and steel
plant wastewater, electroplating wastewater, wastewater metallurgy,
coal washing wastewater treatment, sludge dewatering. Can also be
used to clarify and drinking water purification treatment, and
sugar & juice mills.
- Soluble in water, safe, non-toxic, hydrolytic stability, is not
sensitive to the change of pH value, anti-chlorine. Harmless,
no-flammable and non-explosive, it can be stored at room
temperature, it cannot be placed in the sun. It is slightly acidic,
when skin contact, wash immediately with plenty of water.
- It used as the oil drilling additive in oilfield. The role of PAM
is to adjust drilling fluid rheology, carrying cuttings, drilling
bit lubrication, favorable. In addition, it can greatly reduce the
accident, reduce the abrasion of equipment, and can prevent the
occurrence of hole leakage and collapse, the caliper rules.
Blufloc APAM Specifications:
Off-White Granular Powder
Approximate Brookfield viscosity at 25° C:
Specific Gravity at 25°C:
PH (1% aqua solution):
Storage Temperature (°C):
0 - 35
Blufloc APAM Grade Competitive Advantage:
Temperature torerant and Salt Resistant
Productivity over 65000mt annual.
Non corrosive of suggested dosage, economical and effective at low
Can eliminate the use of alum & further ferric salts when used
as primary coagulants.
Reduction in sludge of dewatering process system.
10 years manufacturing experience, with more than 20 technical
Blufloc APAM Application Methods:
Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be
dissolved to 0.1-0.5% concentration.
The time required to dissolve the flocculant varies according to
the type of flocculant, water quality, temperature and agitation.
However, most flocculants generally require around 1 hour of
agitation to completely dissolve the powder. Incomplete mixture of
flocculant or lumping may inhibit the performance of the
The ideal revolution of the agitator is between 200-400rpm. A high
speed agitator operating without reducing the revolution of a motor
is not advised, since it may cut the molecules of the flocculant.
An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.
The dosage range of varies from 1 - 3.0 ppm depending upon the type
of effluent and application. Advised to do jar tests for evaluating
the functioning and approximate dosage.
Put sample of effluent in a beaker and add it as designated,
agitate for 1 minute at 100-120 rpm and then slowly agitate at
60rpm. Determine the flocs properly at this time and note the
sedimentation and clarity of top solution.
Bluwat Company Profile
Bluwat is a leading and TOP 5 Polyacrylamide manufactory in China,
we produce Anionic PAM, Cationic PAM and Nonionic PAM, with annuel
capacity about 60000tons, and export over 30000 tons to more than
50 countries every year, we also provide OEM service for Nalco,
Basf, Kemira, Ashland and SNF etc.
Blufloc APAM Package and Storage:
- Packed in Kraft or PE bags with inner plastic bags, with each bag
containing 25kgs, or 750kgs net big bag.
- Stored in original packaging in cool and dry place, away from
sources of heat, flame and direct sunlight.